Repair Land Rover Discovery 1 Rear Electric Windows Landyworld

9 Апр 2014 | Author: | Комментарии к записи Repair Land Rover Discovery 1 Rear Electric Windows Landyworld отключены
Land Rover Electric Cars

Repair Land Rover 1 Rear Electric Windows

on December 29, 2013 by admin in Technical // 5 Comments

There are a few problems with discovery windows.  The switches in the console don’t seem reliable I have had to change a  The good news is all of these electric window are the same so it’s easy to them around to prove if the switch at fault.


If your rear electric windows open from the centre switches or from the switches on the door, it’s more you have a problem with the window ECU.  This control unit sits the glove box and also appears to be a problem.

If you can use a soldering iron and a few basic this is definitely worth a go you start ordering expensive window ECU just to fix the rear windows.

I have had several asking if I can supply reconditioned electric window lift  I often have these for with the dry joints soldered up and  Please see the land rover page.

 If you are unable to repair your own and I don t currently have any available I am to have your unit  Please contact me for more

To repair Land Rover electric window lift ECU

you need to remove the glove  This is easy enough; you the four bolts holding the (7mm socket or spanner for these).

Once you have the bolts from both you can lift the glove box out. a bit of fiddling you can get the spring loaded bits to come out through the cut outs without having to anything else.

Once the glove box is out of the way you can easily the electric window ECU see picture for location. This is on a none ABS If yours has ABS the window lift ECU is in the same place but there be an ABS ECU alongside it.

Land Rover Electric Cars

In the above picture I already prised out the black from around the ECU multi this comes out easy with a flat head  Once this trim is out of the way you can the board from the electric control unit.  The board will come out the ECU still bolted in place; is no need to remove the bolts it in.

 This is what the top of the circuit will look like.

it over and look for dry joints solder).  If in doubt, re solder any ones.  The one that is commonly damaged is shown

2 Minutes with the soldering and its time to refit and test you have rear electric working on your discovery! The car pics were taken on is our 300tdi Land Rover RHD; some other may vary slightly.  My rear windows didn’t work at all for this was made all the more by the fact I fixed it in 20 minutes in the

 I believe there is a very problem with range classics, I don’t know if share the same electric ECU but I would think it’s likely!

I have since loads of these ECU repairs – it does seem to be a common with discovery rear windows.

Please note article assumes you can use a soldering without burning yourself, car or anything else for that  It’s not a definitive technical its just a few pictures of how I solved the of my Land Rover Discovery windows not opening.

Land Rover Electric Cars
Land Rover Electric Cars
Land Rover Electric Cars
Land Rover Electric Cars
Land Rover Electric Cars
Land Rover Electric Cars
Land Rover Electric Cars

Interesting articles

Other articles of the category "Land Rover":

Twitter-news
Our partners
Follow us
Contact us
Our contacts

dima911@gmail.com

423360519

About this site

For all questions about advertising, please contact listed on the site.


Catalog ALL Electric Cars and hybrid/ News and Information about Electric Car and Electric Vehicle Technologies, batteries for vehicle catalog with specifications, pictures, ratings, reviews and discusssions about Electric and Hybrid cars - Green energy