VLEDS Project Scion iQ DRL Installation VLEDS

31 Мар 2014 | Author: | Комментарии к записи VLEDS Project Scion iQ DRL Installation VLEDS отключены
Scion Electric Cars


V-LEDS Project iQ DRL Installation

Introducing the V-LEDS iQ. This little car is amazing in ways. From being and fun to drive, to being completely from the majority of the cars on the The Scion iQ is a hit.

After this little car over we it would make a great to the family of V-LEDS cars. We like all Scions, it is a great ready for upgrades. We will update all the mods we do right on the blog.

V-LEDS 2011 iQ with DRL_3W_W_6K Installed as

Lets start with the of one of our latest products, the DRL_3W_W_6K. LEDs are sealed units house a 3 chip, 3 watt Ideal for use as a DRL (daytime running or accent lighting. These are bright! We installed a total of 10 of 5 on each side, on the trim to the fog lamps.

We wired them to ignition so they turn on whenever the car is on. In we also wired in a relay The harness is wired into the fog circuit, it turns the DRL LEDs off the fog lights are in use.

  These are impressive! They are bright, in direct midday sunlight. are so bright that they light onto the ground as as you can see in the photo.

Installation of these is pretty straight forward. If you some basic tools and knowledge you can create a completely new for your car or truck in an afternoon. Is a look you want for your

Here is where you can find the on V-LEDS website: DRL_3W_W_6K   you click the link you will on the product page. You will to know how many of these you They are sold individually, as 1

On our Scion iQ we used a total of 10

First lets take a at what you need:

An electric with various sized bits

Tools for wiring; solder iron, test etc.

Wiring accessories; wire, zip ties, terminals, loom etc.

For our iQ we chose the lower fog lamp to install these LEDs. We the plastic trim panels and that they were for mounting these LEDs to. The fog are optional on the iQ.

This location work regardless if it has fog lamps or

Here are some pictures of the process:

Drill a 3/16 to mount the DRL LED

After locating and where you want to install the use a 3/16 drill bit to make a (A little side note: you have drilled your ALL the snap this cover on the car and drill holes in the plastic of the too. This allows for the to pass through the bumper for wiring.)

Scion Electric Cars

Routing wires through hole.

Next, route the from through the hole and the threaded mount into the Use the supplied nut to secure the LED to the mounting

Routing wiring through

After you have located, and installed all of the LEDs you will to route all of the wiring through the of the bumper. Here is where the tip up above comes in handy.

All is routed and ready to be connected to the

After the wiring was routed through the we covered it in some loom. We have 9006 style ends in our shop, so we went and crimped some of these on the The ends made for a direct into the relay harness we (Installation note: the Red wire is 12 V and the White wire is Ground-)

DRL on.

After finalizing all the connections we ready to test the lights. are pretty bright, this it troublesome to get a quality picture.

We these lights in 3 colors. 6K Amber, and Red. You can find here on V-LEDS.com:

Thanks for If you have questions regarding product please send an to our customer service department at We are quick to respond via email and can any questions you may have about our

Here are some more of our Scion iQ .

Scion Electric Cars
Scion Electric Cars
Scion Electric Cars
Scion Electric Cars

Interesting articles

Other articles of the category "Scion":

Our partners
Follow us
Contact us
Our contacts



About this site

For all questions about advertising, please contact listed on the site.

Catalog ALL Electric Cars and hybrid/ News and Information about Electric Car and Electric Vehicle Technologies, batteries for vehicle catalog with specifications, pictures, ratings, reviews and discusssions about Electric and Hybrid cars - Green energy